|
Chlorine Granules
These 55% Chlorine Granules are
completely soluble and will hardly affect the pH of swimming pool
water. As they contain Cyanuric Acid they are automatically stabilised
against destruction of chlorine residual by sunlight.
DIRECTIONS FOR USE
1. To maintain the chlorine level in private pools at a rate of
between 2 to 3mg/litre (ppm), add 84g per 45.5m3 per day (3oz per
10,000 gallons). For spas add at a rate of 4.2gm/2.27m3 (500gls).
Maintain a level of 3mg/l (ppm).
2. Pre-dissolve the granules and add to the pool choosing a period
when the pool is not in use. Re-adjust the pH to between 7.2-7.6 for
optimal bather comfort.
3. Regularly use a reliable Test Kit to determine Free Chlorine
residual/pH levels and dose the pool accordingly.
|
|
1kg Stabilised Chlorine
Granules |
£9.99 |
 |
|
2kg Stabilised Chlorine
Granules |
£14.99 |
|
|
5kg Stabilised Chlorine
Granules |
£22.95 |
|
|
10kg Stabilised Chlorine
Granules |
£49.99 |
|
|
25kg Stabilised Chlorine
Granules |
£129.99 |
|
Winterlong
Relax Winterlong is a slow-release
highly economical Algicide. One single 2ltr dose is sufficient to control algae
for between 3-6 months in a 50 cubic meter (11,000gal) pool.
Use Winterlong as directed to eliminate and control most types of algae over
the winter period.
Winterlong is pH sensitive and should only be used on pool water maintained
within a pH range of 7.2 - 7.6
Do not add chlorine within 24
hours of using this product or dose this product within 24 hours of adding
chlorine to the pool.
DIRECTIONS FOR USE
1. Adjust pH to 7.2-7.6
2. Add the required amount of Winterlong directly over the water inlets and
leave filter plant running to ensure even distribution.
3. Use a copper Pool tester to check Total Copper residual once per month. Add a
repeat dose if residual is below 0.2mg/l.
Relax pool chemicals are manufactured by Plastica in the UK .
|
2lt Winterlong - treats
11,000 gallons |
£14.99 |
|
Pipe Stop
Ends
£3.99
